CLEANING OF IRRIGATION SYSTEMS FROM MUDDY SEDIMENTS BY HYDROMECHANIZATION METHOD

Authors

  • Aziz Haydarov PhD doctoral student, "Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University
  • Aybek Arifjanov DcS, prof., "Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University
  • Sarvarbek Melikuziev PhD student, "Tashkent Institute of Irrigation and Agricultural Mechanization Engineers" National Research University
  • Husrav Kabutov Glacier Studies Center of the Academy of Sciences of the Republic of Tajikistan State Scientific Institution (SSI), 33 Rudaki Ave., Dushanbe 734025, Tajikistan

Keywords:

Irrigation systems, hydraulic excavator, spring, mud, mudtwinkling, coating

Abstract

The article mentions the use of a new technology for cleaning irrigation systems from muddy sediments. This technology was modeled and tested using Ansys Mechanical Finite Element Analysis (FEA) Software for Structural Engineering. Analytical analyzes were carried out to maintain the design parameters of irrigation system coatings. As a result of the analysis, a deformable tooth device using a wedge with a thickness k (N/m) is applied to the coating with an impact force F (N) ???? =10 0 -30 0 It is determined that it is affected under the corners, so that it is compressed in the range of =5-15 (mm) and does not damage the coating of the irrigation system.

Downloads

Published

2023-04-07

How to Cite

Haydarov, A. ., Arifjanov, A. ., Melikuziev, S. ., & Kabutov, H. . (2023). CLEANING OF IRRIGATION SYSTEMS FROM MUDDY SEDIMENTS BY HYDROMECHANIZATION METHOD. Horizon: Journal of Humanity and Artificial Intelligence, 2(4), 61–67. Retrieved from https://univerpubl.com/index.php/horizon/article/view/900

Issue

Vol. 2 No. 4 (2023): APRIL

Section

Articles